![]() I realize this TV is not in the middle of a room, but it sure could be. Related: Leather Sectional Sofas to Watch TV From Sam Crawford Architects, original photo on Houzz Remember you are using a power strip inside your cabinet so you only have to hide one cord. ![]() Tip: If you cannot install a floor-mounted electrical outlet, then use the best cable cover you can get to hide the cord and make it lie flat on the floor as it runs to your wall outlet. It is ideal to have no more than one power cord emerging from your cabinet. I would be tempted to place a box on the base of this that housed the components and their cables with a power strip inside. It will not hide all of the cables, so I would recommend this type when you have just a minimum number of components. Susan Diana Harris Interior Design, original photo on HouzzĪ TV holder like the one in this photo hides the back of the TV and is nice looking from behind. The IR repeater is very tiny so you can mount a few of them under the TV screen to run multiple components. You can install a device called an “IR repeater” under the TV screen for each item you need to run with a remote. Tip: If you don’t want to see all of the extra components - DVD player, cable boxes, and so on - keep the doors of the cabinet opaque. Again, it is essential that your cabinet has room to house the components and their cables. Hiding the back of the TV makes seeing it from outside no worse than seeing the backs of chairs or other furniture. They are close enough to a wall to possibly have a wall outlet to plug into, but with all of those windows, they may have used a floor plug. They’ve built a box to house the TV which matches the cabinet below. In a living room like this, with floor-to-ceiling windows all the way around, walls for the TV are hard to come by. Related: Hide Your Cords With a New Media Cabinet Create an access panel in the bottom of the cabinet so you can reach the plug. ![]() If you are installing a new outlet, place it right under the cabinet, and allow space under the cabinet for the plugs because they will stick up from the outlet a couple inches. Tip: Floor-mounted electrical outlets are your friend. ![]() By keeping it no taller than is necessary it defines the TV and dining areas without dividing the room. It’s beautiful on all sides and offers plenty of room for components, cables, a power strip and cords. The cabinet in the photo above fits the bill. You will then only need to deal with a single power cord emerging from the cabinet. Use a power strip inside the cabinet so all cables and cords are contained inside the cabinet. Place all your components inside the cabinet.ģ. Hide the back of the TV with cabinetry.Ģ. ![]() Here are the three essential elements to float your TV away from the wall.ġ. What if you could just get away from the wall and place your TV out in the middle of the room? Well you can! There are just a few essential elements to doing this successfully and having it look like it was meant to be. Or it can mean you have big problems deciding whether to situate furniture to face the TV or face the view. In these cases, putting the TV against a wall can mean your seating will have its back to the rest of the room. It can be a challenge to find the right spot for the television in today’s open-plan homes, lofts, and rooms with floor-to-ceiling windows. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |